YONGNUO RF-603N II N1 2.4G Wireless Remote Trigger Transceiver for Nikon

Description

Hot Sale! Buy More, Save More!
YONGNUO RF-603C II/C3 2.4GHz Wireless Flash Trigger Remote System for Canon
USD .99
YOGNNUO RF603N3 II Wireless Remote Flash Trigger Transceiver Receiver for Nikon
USD .99
YONGNUOY N622N II 2.4G Wireless Flash Trigger Controller Transmitter for Nikon
USD .99
RF605C Wireless Camera Flash Trigger Transmitter Remote Shutter for Canon
USD .99
Godox X2T-S X2T-N X2T-C Wireless Flash Trigger Transmitter for Nikon Sony Canon
USD .99
YONGNUO RF605N 2.4G Wireless Flash Trigger Remote Control for Nikon
USD .99
2.4GHz Wireless Remote System Trigger Transceiver Suit
Introduction:
YONGNUO RF-603 II
, the manual
Flash trigger and shutter release
( you can use those two functions simultaneity ), it adopts a global free
FSK 2.4GHz wireless channel
which can be suitable in many countries. RF-603 II with FSK system, can be more effective to guarantee speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m, and is suitable for the first generation RF-603.
Improved F
eatures:
●
Higher sync speed than the first generation
The highest flash sync speed up to 1/320 second (some of models may only reach to 1/250s or less, difference combination of models of flash and camera using may achieved difference flash sync speed).
●
Adding the Locking rings
●Improved Flash / Shutter control Buttons
●Suit for first generation, you can use them together.
●Working for more non Canon/Nikon cameras and single firing pin
ca
meras
ALL Standard Hot shoe DSLR Camera except Sony and Minolta.
Note: Canon cameras choose RF-603 II Canon version, Nikon Camera choose RF-603 II Nikon version, other cameras can choose any version.
●
Adding the power switch for single transmitter
Set the power switch on TX (single transmit) or TRX (transmit-receive automatic switch) state according to different shooting requirement.
When it used as wireless triggering transmitter and flash testing, set to "TX";
When it used as wireless triggering receiver, using shutter release or other extended functions, set to "TRX".
set to OFF means turn off the power.
Functions:
(1)
Remote Shutter Release
a), Wireless Remote Shutter Release ( On camera )--- You can mount one receiver into the camera and connect it with the camera via the 2.5mm shutter connecting cable, and can remote control the camera with other receiver. You can use it to fulfill the function of Auto-Focus, Continuous                shooting, Long Exposure, Half-Way Pressing, Full-way Pressing and Bulb.
b), Remote Shutter Release ( off Camera )--- You can use the single receiver to fulfill the function of remote shutter release after you connect it with your camera via the 2.5mm cable.
Note: This product can achieve wired /wireless remote shutter release function, need to LS-2.5 series shutter connecting cable(or purchase) according to the different cameras. When using the shutter release, the power switch need to set in”TRX” state.
(2)
F
lash Trigger
a), To fire the Flash Speedlite --- one receiver can fire one flash speedlite, one set of RF-603 can control 2pcs Flash Speedlite at the same time.
b), To fire the Studio Strobe light --- You need to purchase an extra 6.35mm cable
(3)You can use
ABOVE TWO FUNCTIONS
simultaneousty
(4)The RF-603 II
Nikon
version and
Canon
version can be used together
Specification:
Type: FSK 2.4GHz wireless remote sustem
Transmitter Distance: 100M
Channel: 16 Channels
Release: Half-way press, Full-way Press
Receiver Interface: One is 2.5mm Socket, for shutter release
One is standard PC socket for flash Speedlite or studio Strobe
Battery Type: AAA*2 (NO included battery)
Receiver Stand-by time: Up to 45hours
Size: 37 x 30 x 81.5mm (W x H x D)
Suit for Flash Speedlite with " Sleep mode" function:
Nikon
Canon
Olympus
Pentax
Samsung
Yongnuo YN-460, YN-460 II, YN-560II, YN-46 II, YN-468 II, YN-565EX, YN-568EX in manual mode
Yongnuo YN-560 III ( it has built-in receiver ), you can use one RF-603 II transceiver to work with it.
and other flashgun which has " Wake up " function
For this RF-603 II, we have four versions, different version has different shutter release cable, you can choose the related cable to fit for your camera.
Suitable For:
N1 Version:
--- D800E / D800 / D700 / D300 / D2X / D2H / D200 / D1H / D1X / D3X / D3 / D4
--- N90s / F5 / F6 / F100
---Fuji Film: S5 Pro / S3 Pro
---Kodak: DSC-14N
Packaged Included:
2 x Transceivers
1 x 2.5mm port Shutter release cable for N1
1 x Manual
Sign Up Now !
You may also like
YONGNUO RF-603N II N1 2.4G Wireless Remote Trigger Transceiver for Nikon
2.4GHz Wireless Remote System Trigger Transceiver Suit
Introduction:
YONGNUO RF-603 II
, the manual
Flash trigger and shutter release
( you can use those two functions simultaneity ), it adopts a global free
FSK 2.4GHz wireless channel
which can be suitable in many countries. RF-603 II with FSK system, can be more effective to guarantee speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m, and is suitable for the first generation RF-603.
Improved F
eatures:
●
Higher sync speed than the first generation
The highest flash sync speed up to 1/320 second (some of models may only reach to 1/250s or less, difference combination of models of flash and camera using may achieved difference flash sync speed).
●
Adding the Locking rings
●Improved Flash / Shutter control Buttons
●Suit for first generation, you can use them together.
●Working for more non Canon/Nikon cameras and single firing pin
ca
meras
ALL Standard Hot shoe DSLR Camera except Sony and Minolta.
Note: Canon cameras choose RF-603 II Canon version, Nikon Camera choose RF-603 II Nikon version, other cameras can choose any version.
●
Adding the power switch for single transmitter
Set the power switch on TX (single transmit) or TRX (transmit-receive automatic switch) state according to different shooting requirement.
When it used as wireless triggering transmitter and flash testing, set to "TX";
When it used as wireless triggering receiver, using shutter release or other extended functions, set to "TRX".
set to OFF means turn off the power.
Functions:
(1)
Remote Shutter Release
a), Wireless Remote Shutter Release ( On camera )--- You can mount one receiver into the camera and connect it with the camera via the 2.5mm shutter connecting cable, and can remote control the camera with other receiver. You can use it to fulfill the function of Auto-Focus, Continuous                shooting, Long Exposure, Half-Way Pressing, Full-way Pressing and Bulb.
b), Remote Shutter Release ( off Camera )--- You can use the single receiver to fulfill the function of remote shutter release after you connect it with your camera via the 2.5mm cable.
Note: This product can achieve wired /wireless remote shutter release function, need to LS-2.5 series shutter connecting cable(or purchase) according to the different cameras. When using the shutter release, the power switch need to set in”TRX” state.
(2)
F
lash Trigger
a), To fire the Flash Speedlite --- one receiver can fire one flash speedlite, one set of RF-603 can control 2pcs Flash Speedlite at the same time.
b), To fire the Studio Strobe light --- You need to purchase an extra 6.35mm cable
(3)You can use
ABOVE TWO FUNCTIONS
simultaneousty
(4)The RF-603 II
Nikon
version and
Canon
version can be used together
Specification:
Type: FSK 2.4GHz wireless remote sustem
Transmitter Distance: 100M
Channel: 16 Channels
Release: Half-way press, Full-way Press
Receiver Interface: One is 2.5mm Socket, for shutter release
One is standard PC socket for flash Speedlite or studio Strobe
Battery Type: AAA*2 (NO included battery)
Receiver Stand-by time: Up to 45hours
Size: 37 x 30 x 81.5mm (W x H x D)
Suit for Flash Speedlite with " Sleep mode" function:
Nikon
Canon
Olympus
Pentax
Samsung
Yongnuo YN-460, YN-460 II, YN-560II, YN-46 II, YN-468 II, YN-565EX, YN-568EX in manual mode
Yongnuo YN-560 III ( it has built-in receiver ), you can use one RF-603 II transceiver to work with it.
and other flashgun which has " Wake up " function
For this RF-603 II, we have four versions, different version has different shutter release cable, you can choose the related cable to fit for your camera.
Suitable For:
N1 Version:
--- D800E / D800 / D700 / D300 / D2X / D2H / D200 / D1H / D1X / D3X / D3 / D4
--- N90s / F5 / F6 / F100
---Fuji Film: S5 Pro / S3 Pro
---Kodak: DSC-14N
Packaged Included:
2 x Transceivers
1 x 2.5mm port Shutter release cable for N1
1 x Manual
Payment
Delivery details
return policy
feedback
Contact us
Payment
1. We only accept Paypal payment.
2. Great appreciate for prompt payment. Unpaid item will be filed without receiving payment in 14 days after listing ended.
Shipping
1. All items will be shipped to buyer's ebay address. Before you pay, please make sure your address in ebay matches the address you would like us to ship to.
2. We will dispatch the item in 2 business days (weekends and public holidays are not conginized as business days) after confirming your full payment.
3. As there are weight and cubage restrictions on international order, we are unable to offer you any discount. There is no local pickup service, no third party shipping carrier will be used.
4. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Return
1. We are committed to give you the best customer service possible. If the item disappoints you for any reason, please contact us and we'll assist you with a prompt solution. We'd like to settle any problem in a friendly manner.
2. We want to make sure you are happy with our item. If you want to return the item for any reason, contact us within 14 days from the delivery date and we will give you a refund or exchange. Only unused, undamaged and original condition item can be qualified for a return. Buyer is responsible for return shipping fee. Please contact us to get a RMA number BEFORE sending out your return. Goods without RMA number will NOT be accepted. Please write the RMA number on the returning package.
3. We will not be liable to customer for any damages beyond the amount of money that customer actually paid us.
About us
Our aim is to offer our clients items with high quality and fast delivery, also our price will be reasonable.
Feedback & Contact
1. We are care about our valued buyers. Please contact us through email with any questions or concerns. We will reply your messages within 2 business days. Emails, which are received at weekend, will be replied on Monday. If you do not receive a response in expected time period from us, please check your junk or spam mailbox.
2. If you are happy with our item and service, please do leave us positive feedbacks and 5 stars rate. Please email us before leaving any 1 or 2 ratings, neutral or negative feedbacks or open any cases. We understand the concerns and frustrations you might have and we, of course, will do our endeavor to resolve the issues. Please give us opportunities to resolve any problems. We thank you for your effort to make this sale and purchase experience a happy one!
Hot Sale! Buy More, Save More!
YONGNUO RF-603C II/C3 2.4GHz Wireless Flash Trigger Remote System for Canon
USD .99
YOGNNUO RF603N3 II Wireless Remote Flash Trigger Transceiver Receiver for Nikon
USD .99
YONGNUOY N622N II 2.4G Wireless Flash Trigger Controller Transmitter for Nikon
USD .99
RF605C Wireless Camera Flash Trigger Transmitter Remote Shutter for Canon
USD .99
Godox X2T-S X2T-N X2T-C Wireless Flash Trigger Transmitter for Nikon Sony Canon
USD .99
YONGNUO RF605N 2.4G Wireless Flash Trigger Remote Control for Nikon
USD .99