Yongnuo RF-603 II Wireless Flash Trigger Receiver Transmitter for Canon EOS

Description

Store category
Sign Up Now !
You may also like
Yongnuo RF-603 II Wireless Studio Flash Trigger Receiver Transmitter f Canon EOS
Product Description
Introduction:
High Quality!! 100% Brand NEW!!
The new RF-603 II is improved version of RF-603, it is a remote shutter release as well as a multi-functional radio flash trigger which can synchronously trigger flashes and studio strobes. Through the transceiver based system each item can be used flexibly as trigger or receiver. Only 2 AAA batteries are required as power source for each item.
The 2.4GHz wireless frequency is suitable in most countries and guarantees high speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m. The synchronization speed can reach to 1/320, depending on the situation it may reach to 1/250 or less.
A set consist of 2 equal transceivers. Both of them can be a receiver as well as transmitter. It can trigger 1 flash with one set, since one serves as trigger and one as receiver. You can also buy additional transceivers to trigger 2 or more flashes at the same time. The pictures below just show one of the two sets.
Improved features:
●Hot shoe locking system to prevent from slipping off
●Switch on side for easy operation
●Enhanced self-detecting syste
1. Works as a wireless shutter release control
Auto focus, continuous shooting, long exposure, half-way pressing, full-way pressing is supported
Depending on the camera model a special shutter release cable is included in the package
2. Transceiver based system - works as a wireless flash trigger and receiver
Each RF-603 is designed to work as trigger and as receiver. The unit automatically detects the mode it should work in. You have the full flexibility out of your gear.
As a receiver it fires off-camera flashes which are placed on the hot shoe of the transceiver.
Additionally the transceivers PC Sync connector can be used to fire studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
Wake up function: Mount the transmitter into hot shoe of the camera, connect the receiver with the flash, press half-way the shutter button to wake up the flash at the same time, the green signal light will be bright for some seconds and then press shutter button completely to fire the flash. This "Wake up" function is only supported for flashes which have a sleep mode.
As a trigger the RF-603 can be placed in the cameras hot shoe or if you wish be connected with the camera by a PC Sync cable. In the latter case you are free to mount an additional flash top-camera.
One transceiver can trigger more than 1 flash at the same time. You would have to buy additional transceivers for 2 or more flashes, since you need one transceiver as a trigger and one or more transceivers as receivers.
3. Wireless trigger studio flash
Using a PC Sync cable the transmitter can wirelessly and synchronously trigger your studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
Specification:
Type: FSK 2.4GHz wireless remote system
Transmitter Distance: 100m
Channel: 15 different channels and all channels
Release: Half-way press, full-way press
Transmitter Port: PC Sync
Receiver Port: PC Sync, 2.5mm for shutter release
Time of shooting: Up to 20000 times
Receiver stand-by time: Up to 45 hours (using AAA batteries)
Dimensions: 37mm x 30mm x 81.5mm
Weight: 150g
Compatible Cameras:
Canon: EOS 7D, 50D, 40D, 30D, 5D, 20D, 10D, 5D Mark II, 5D Mark III, 1D X, 1D Mark IV, 1Ds Mark III, 1D Mark IIII, 1D Mark II N, 1Ds Mark II, 1D Mark II.
Compatible Flashes
Nearly all flashes with a standard hot shoe and being released by the middle contact are compatible
Please note that the RF-603 only supports the manual flash mode, not TTL, but it works with TTL flashes
Supports the "sleep mode" or "wake up" mode which some flashes are equipped with
Canon 580EX II, 580EX, 540EZ, 520EZ, 430EZ, 430EX, 420EX, 420EZ, 380EX
Nikon SB-900, SB-800, SB-28, SB-27, SB-26, SB-25, SB-24
Package Content:
2 x Transceivers
1 x Shutter release cable (C3 )
1 x User manual
About Payment
About shipping
About Feedback
Return & Refund
About Guarantee
About Payment
*
We accept PAYPAL only for safety
and easy
About shipping
*
Ship to US Only
*
We will ship the item within 1 business days after clearance of payment.
*
Shipment is from Hongkong via hongkong post. It usually takes about 4-15 business days to US.
*
We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
About Feedback
* You have 7 days to contact us and 30 days to return it from the date it was received. Shipping cost is bear by both seller and buyer in half.
* All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number and specific reason for the return.
* We will refund or resend you after we have received the returned item
* We will bear all the shipping cost if the product(s) is (are) not as advertised.
Return & Refund
* 12 months Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
* Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.
* You agree to all of the above-listed policies upon ordering on ebay
About Guarantee
*We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very *important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.