MYPLUMBINGSTUFF Tankless Water Heater Flushing Kit DESCALER KIT

Description

Tankless Water Heater Flushing Kit
Description
Included:
5-Gallon Flush tank, Submerisible Pump (zoeller), (2) 5' Ft Hoses, Step by Step instructions
Technical Details
*Helps maintain the performance of your tankless water heater
*Connects easily to tankless isolation valves
*For use with all Tankless water heaters
*Restores Efficiency Fast
*Safe to use
Flushing Your Tankless Heat Exchanger
1. Disconnect electrical power to the water heater.
2. Close the shutoff valves on both the hot water and
cold water lines.
3. Connect pump outlet hose to the cold water
line at service valve.
4. Connect drain hose to service valve.
5. Pour 4 gallons of undiluted virgin, food grade,
white vinegar into pail.
6. Place the drain hose and Submerisible pump
into the cleaning solution.
7. Open both service valves on the hot
water and cold water lines.
8. Operate the pump and allow the cleaning solution
to circulate through the water heater for 1 hour at
a rate of 4 gallons per minute (15.1 liters per
minute).
9. Turn off the pump.
10. Rinse the cleaning solution from the water heater
as follows:
a. Remove the free end of the drain hose
from the pail.
b. Close service valve, and open shutoff
valve. Do not open shutoff valve.
c. Allow water to flow through the water heater for
5 minutes
d. Close service valve, and open shutoff
valve.
11. Disconnect all hoses.
12. With closed, remove the in-line filter at the
cold water inlet and clean out any residue. Place
filter back into unit and open.
13. Restore electrical power to the water heater.
Cleaning solution is 4 gallons of
undiluted virgin, food grade,
white vinegar.