Godox Xpro-C E-TTL Wireless 2.4G Remote Speedlite Flash Trigger for Canon Camera

Description

template_preview
Godox Xpro-C E-TTL Wireless 2.4G Remote Speedlite Flash Trigger
for Canon Camera
Demonstration:
Desription:
This flash trigger with built-in wireless X system for versatile using methods, featuring multi-channel triggering and stable signal transmission, can as a wireless flash trigger for camera flash, outdoor flash, and studio flash, a wireless trigger for Canon speedlites, a wireless shutter release trigger, also can as a flash(without wireless X system) trigger with 2.5mm sync cord jack. With 5 group buttons and 4 function buttons for convenient operation. And it is compatible for multiple camera models and flash models. Nice choice for you!
Features:
It can not only control the flashes with built-in wireless X system, such as camera flashes, outdoor flashes and studio flashes, but also can control the original flashes for Cannon when using in combination with X1R-C receiver. Widely applied for Canon EOS series cameras with hot shoe mount.
Fully support TTL autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one shoot & multi-shoot setting, group modeling lamp control, group zooming, adjusting all groups' output value simultaneously, etc.
Lightweight feature for great portability. Support Type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack.
16 groups and 32 channels to wireless control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.
Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation. Compatible for multiple flashes and camera models.
Specification:
Condition: 100% Brand New and High QualityCondition: 100% Brand New and High Quality
Material: Plastic
Compatible Cameras: For Canon EOS cameras (E-TTL ii autoflash) Support for the cameras that have PC sync socket.
Power Supply: 2 X AA Batteries(Not included)
TTL Autoflash: E-TTL II
Manual Flash: Yes
Stroboscopic Flash: Yes
High-Speed Sync: Yes
Second-Curtain Sync: Yes
Flash Exposure Compensation: Yes, ±3 stops in 1/3 stop increments
Flash Exposure Lock: Yes
Focus Assist: Yes
Modeling Lamp: Controled by the flash trigger
Beeper: Controled by the flash trigger
Wireless Shutter: The receiver end can control the camera shooting via the 2.5mm sync cord jack
ZOOM Setting: Adjust the ZOOM value by the transmitter
TCM Function: Transform the TTL shooting value into the output value in the M mode
Firmware Upgrade: Upgrade through the Type-C USB port
Memory Function: Settings will be stored 2 seconds after last operation and recover after a restart
Transmission Range (approx.): 0-100m
Built-in Wireless: 2.4G
Modulation Mode: MSK
Channel: 32
Wireless ID: 01-99
Group: 16
Display: Large LCD panel, backlighting ON or OFF
Size: Approx. 90 X 58 X 50mm / 3.54 X 2.28 X 1.97inch
Weight: Approx. 300 g
Compatible flash and camera models:
1. can be used to control following flash models:
2. Compatible for Canon EOS series camera models:
Packing List:
1 x Wireless Flash Trigger
Note: Camera, flash and batteries are not included.
We are happy to accept orders from Worldwide.
Parcel will be shipped to you by Regular Airmail that generally takes 7-21 working days  to deliver on your hands.
Sometimes,It may take a longer time to reach Chile,France,Greece,Spain,Italy,Indian,Brazil,Argentina,South Africa,if you are buyer in these 9 countries,please aware of the long shipping time before you purchase this item.
Please allow up to 48 hours preparation for shipping, although usually item send within 24 hours after payment confirmed.
We will not be responsible for item loss because of wrong or undeliverable address.
We Accpect PayPal
Accpect Credit Card Payment Through Paypal(Verified only with confirm address)
No Surcharge
We offers a No-hassle exchange within 30days only if your goods are found to be defective by manufacturer. The faulty item will be exchanged for the same model once the return guidelines are followed:
*We might ask buyer to test the item in order to eliminate improper use, buyer has responsibility to cooperate and follow the test correctly.
*The item must be returned in NEW condition and with all the original manufacturers packaging, including cartons, parts and instructions manual etc.
*Customer's response of cost of return shipping, while we will cover all expense of send out replacement.
*Any returning must enquire us first, to send back without return ID (given by our customer service) will not be accepted.
*Shipping and insurance charges are not refundable.
*We does not has responsibility to response on item lost during returning.
*Items found not to be defective will be returned at buyer's expense.
On Mar-24-18 at 01:00:08 PDT, seller added the following information: