16 Channels Wireless Flash 1 Trigger Transmitter Set + 2 Receivers for Canon

Description

About us
Shipping
Payment
Returns
Contact us
Store Categories
Payment Policy
16 Channels Wireless Flash 1 Trigger Transmitter Set + 2 Receivers for Canon
Description:
The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras.
It consists of a signal sender and 2 receiver triggers and works by means of the frequency modulation wireless remote control.
The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa.
All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users.
Users can freely match and use the sender and the receiver according to the demands, which have 16 isolated channels to suit for specific shooting environments.
The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption.
Specification:
Power of the signal transmitter: 23A 12V mini battery(not included)
Power of the receiver(AC): 2 x1.5V AAA Battery(not included)
Outdoor working distance: max. 30m / 90feet (open area, no fraise)
Indoor operating distance: max. 25m / 75feet
Frequency: 433Mhz
Synchronous speed: Max. 1/250sec
How to use:
Make sure the channel selector of both transmitter and receiver at same position.
Insert your flash hot shoe socket into the receiver's hot shoe .
Press the test button on your transmitter. The Flash should now flash.
Insert the transmitter's hot shoe socket into your camera's hot shoe .
If your camera does not have a hot shoe use a PC sync cord and insert into the socket.
You should now be ready to start shooting.
Suitable For:
Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;
Canon 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX/EXII, 430EZ, 420EX, 420EZ, 380EX;
Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;
Olympus FL-50, FL36;
Sigma EF-500 DG Super, EF-500 DG ST, EF-430;
Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;
Vivitar 285HV (Older Vivitar 285/283 works only with PC sync);
Other flash models with a trigger voltage of 12V or lower;
Work with flash units using universal hot shoe like Nikon, Sigma, Olympus, Pentax (except Minolta SONY as they use a special hot shoe).
Package Includes:
1 Piecex 16-channel Transmitter(23A 12V battery NOT included)
2 Piecex16-channel Receiver(AAA batteries NOT included)
1 PiecexPC Sync Cord(2.5mm to PC)
1 PiecexUser Manual
Note:
PT-16/PT-16NE use the whole new system, so it can not work with any other flash trigger.
If you use Nikon i-ttl system flash on this trigger, please confirm the flash is working in "M" mode, the receiver can not work with i-ttl flash in "ttl" mode, any i-ttl flash without manual mode will not work properly.
SKU: VJU0002584763005021
Shipping And Handling Policy
The buyer is responsible for any applicable import duties and local taxes. Please verify with your customs before making your purchase.
Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses.
People always bought together with